Swiss
traditions.
Quality
and high-tech
engineering
solutions.
EN

Screw (auger-type) pumps for oil-and-gas and chemical industry (Italy)

Medium pressure screw pump

Characteristics:

  • Flow rate from 0,6 to 320 m3/hr
  • Discharge pressure up to 30 bar
  • Suction pressure from «-» 0,5 to 10 bar
  • Kinematic viscosity from 10 to 1500 sSt
  • Operating temperature from 0 to 120 °C
  • Drive speed from 750 to 3600 rpm

Application - for high viscosity and gas bubble liquids

Low pressure screw pump for lubrication systems

Characteristics:

  • Flow rate from 24 to 320 m3/hr
  • Discharge pressure up to 16 bar
  • Suction pressure from «-» 0,5 to 10 bar
  • Kinematic viscosity from 10 to 400 sSt
  • Operating temperature from 0 to 120 °C
  • Drive speed from 1500 to 1800 rpm

Medium pressure screw pump for lubrication systems

Characteristics:

  • Flow rate from 0,6 to 180 m3/hr
  • Discharge pressure up to 30 bar
  • Suction pressure from «-» 0,5 to 10 bar
  • Kinematic viscosity from 10 to 400 sSt
  • Operating temperature from 0 to 120 °C
  • Drive speed from 750 to 3600 rpm

Low flow rate and low pressure screw pump for lubrication systems

Characteristics:

  • Flow rate 10 m3/hr
  • Discharge pressure up to 16 bar
  • Suction pressure from «-» 0,7 to 10 bar
  • Kinematic viscosity from 10 to 400 sSt
  • Operating temperature from 0 to 120 °C
  • Drive speed from 1000 to 3600 rpm

Screw pump for low viscosity and non-lubrication systems

Characteristics:

  • Flow rate from 0,85 to 6 m3/hr
  • Discharge pressure up to 100 bar
  • Suction pressure from 0,5 to 10 bar
  • Kinematic viscosity from 1 to 10 sSt
  • Operating temperature from 0 to 100 °C
  • Drive speed from 2900 to 3500 rpm

Double screw rotor pump
  • Model 1, 2, 3
    Characteristics:
    • Discharge pressure up to 16 bar
    • Suction pressure up to 6 bar
    • Kinematic viscosity up to 1500-2500 sSt
    • Operating temperature up to 100-200 °C
    • Drive speed up to 3500 rpm

    Application - good lubricating capacity liquids (Model 1), water, chemical and gas-and-oil products, low viscosity non-lubricating capacity liquids

  • Double screw rotor pump
  • Model 4
    Characteristics:
    • Discharge pressure up to 40 bar
    • Suction pressure up to 10 bar
    • Kinematic viscosity up to 15000 sSt
    • Operating temperature up to 300 °C
    • Drive speed up to 3500 rpm

    Application – hazardous liquids, chemical and gas and oil products, medium or high viscosity non-lubricating capacity liquids

Our specialists are always there to help you

Our engineers will provide advice or additional technical information about the offered oil and gas production and transport equipment

Please send your RFQs for oil and gas production and transport equipment to our Technical Department.